Black Box ServSensor JR EME102A, Manual, Page: 114 / 135

112
ServSensor JR
112
6. Utilities
6.1 Utilities
6.1.1 IP S
ET
The IPSet.exe program is used to assign the initial IP address of the
system. It is designed to run on a Microsoft host. Once the program has
started enter the MAC address in the section labeled "Client's Mac
Address". The Mac address can be found on the ServSensor. Next enter
the IP address that you wish to assign to the ServSensor JR. Then press
set.
IPSet.exe first checks the IP address to see if it already assigned. Next
it will assign the IP address and then it will check that the address was
successfully assigned. If all is well then IPSet.exe will report that the
assignment is Complete.
You can verify the IP assignment by using ping or by using a browser
to access the ServSensor JR. To use a browser enter the address
http://10.1.1.7 depending on the IP address that you have assigned.
This utility is located in the help CD provided along with the device.