Black Box ServSensor JR EME102A, Manual, Page: 130 / 135

128
ServSensor JR
128
Q: Can I use the default IP of the device to access the web interface
and later assign the desired IP?
A: Yes, you can access the web interface by entering the IP
192.168.0.100 in your browser.
Q: I’m able to ping the device IP, but I’m not getting the web
interface when I enter the IP in the browser?
A: Possible causes:
a) The proxy settings of the browser may be preventing the access to
the device. Please disable the proxy settings to access the web
interface.
b) You have updated the firmware, but you have not updated the html
code update. Html code updates has to be done, after the firmware
update is done.
Q: Where can I find the MAC address of the device?
A: The MAC address of the device can be found on the bottom cover
of the device, and also on the web interface under System page.
Q: After some days of use, I have changed the IP of the device. But
it changes to the old IP after a few hours. How can I prevent this?
A:
a) What is happening is that after the IP address has been changed by
the user, it is being changed back by a network management program.
One way that you can change the IP address is to statically set the ARP
cache to associate the MAC address with the IP address and then ping
it. Therefore someone or some automated network management