Black Box ServSensor JR EME102A, Manual, Page: 111 / 135

109
CONTENTS
109
5.8 System Page
System Description: This is a Mib II value set when the microcode for
the ServSensor JR was installed. It includes the build time and version
of the microcode. This is a read only field.
Example: ServSensor JR 8 VSP8224 Jan 20, 2004
System Name, System Location, and System Contact: These are MIB
II values that can be accessed via standard SNMP utilities and often
used in management platforms to gain information about the
ServSensor JR.
Use Password: This option enables you to turn on/off the password
security, disabling this option could allow any user to login to the
system and tamper with the settings.
Send Debug Messages: Debug messages can be an aid in determining
the operation of the ServSensor JR. Debug messages are sent to the
host that the browser is running on, or the host where the SNMP set
originated from. To view the debug messages use the samon utility
with the -no command line input.
NOTE
Debug messages should normally be turned off to reduce network traffic.
Data Collect Period (1 to 60 mins): This controls how often data is
collected for use in the graphing.
Display Logo: Turn off displaying the logo by using this option. This
option should normally be turned off to allow the web pages to be
loaded faster.
Date and Time Settings: Using this option you can change the system
time and date as you wish. The time is saved to the battery-backed
clock and is reloaded by the system at reboot time.
Password Settings: Use this option to set the new password for
"Administrator" and "User"