Black Box ServSensor JR EME102A, Manual, Page: 17 / 135

15
CONTENTS
15
2.1 Installing and Configuring Sensors
Installing the sensors
Simply open a web browser, plug in the sensor and the device will
automatically configure itself. The ServSensor JR will recognize the
sensor and begin monitoring it.
Navigating the interface
Choose the page titled Sensors. On the left hand side of the Sensors
page is a list of the different types of sensors. Click on type of sensor
and your sensor will appear with its port number. Click on the sensor
that you want and you will open the Sensor settings screen.
NOTE
After you plug in the sensor and then refresh the summary screen, your sensor
will automatically appear in the list of online sensors. If you click on the link under
the type column you will be taken immediately to the Sensor settings screen.
Entering data
To change any of the data fields you must press set after inputting the
change. The data will not be entered into the ServSensor JR until the
set button is pressed. After you press set, the web page will be
refreshed with the new data. Once you see the new data on the web
page, it indicates the ServSensor JR has accepted the data. The
ServSensor JR will have saved this data to nonvolatile memory and it
will be protected in case of power failure.
Sensor status color indicator
The colors red, orange and green indicate at a glance the status, red is
critical, orange is warning and green is in the normal field.
Disable Autosense