Black Box ServSensor JR EME102A, Manual, Page: 108 / 135

106
ServSensor JR
106
5.6 Mail Page
The ServSensor JR can send mail to any SMTP host. Whenever the
status changes for a sensor that is online an email message can be sent.
If mail is not needed it should be turned off. This will reduce network
traffic and allow the ServSensor JR to operate faster. If you do not
need it we suggest that you disable the email resend feature.
To configure Email click the link at the top of the web page labeled
"
Mail ".
Send Mail: Turn Mail on or off with this choice. Use the list box to
pick either On or Off. Press the Set button to implement your choice.
SMTP Server IP Address: This is the IP address of the SMTP server in
dotted decimal notation, not the DNS name.
Timeout (in seconds from 10 to 30): You can increase the timeout for
SMTP hosts that have poor connectivity. It is best to leave this number
as low as possible while still allowing for communication to the SMTP
host to continue.
Resend Interval (seconds): You can set the period between which a
warning or error mail message will be re-transmitted. The minimum
period is 10 seconds. This time period is also used when resending trap
messages.
Maximum Times to Resend: You can resend the email message a
number of times by choosing this option. Only warning and error
messages are resent.
Attach Picture: This is used to turn ON/OFF the option to attach a
picture with the email.
Mail From: This is the email address of the sender of the email. Due to
anti spam features of many SMTP servers, the Mail From 'address'
must be listed as authorized by the SMTP host otherwise you will
receive a failure message that the host will not Relay this message.
Mail Recipient: The email address of the person that will receive the
email. This is in the form name@domain.com