CHAPTER 6: Planning and Installing an Expanded System (Optional)
59
3. Choose a unique unit address and set the DIP switch for that address; refer to Table 6-1 for addresses up to
16 decimal or
Appendix C
for higher addresses.
Table 6-1. DIP-switch settings for unit addresses.
Unit
Settings* of
Unit
Settings* of
Address
Switch Positions
Address
Switch Positions
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
1
0 0 0 0 0 0 0 1
9
0 0 0 0 1 0 0 1
2
0 0 0 0 0 0 1 0
10
0 0 0 0 1 0 1 0
3
0 0 0 0 0 0 1 1
11
0 0 0 0 1 0 1 1
4
0 0 0 0 0 1 0 0
12
0 0 0 0 1 1 0 0
5
0 0 0 0 0 1 0 1
13
0 0 0 0 1 1 0 1
6
0 0 0 0 0 1 1 0
14
0 0 0 0 1 1 1 0
7
0 0 0 0 0 1 1 1
15
0 0 0 0 1 1 1 1
8
0 0 0 0 1 0 0 0
16
0 0 0 1 0 0 0 0
*“0” = OFF, “1” = ON.
4. Configure the rest of the Transmit Cards you’ll be installing in this specific ServSwitch Multi unit with the
same address.
5. Set these Transmit Cards beside their ServSwitch Multi unit. Gather together all of the Transmit Cards that
will be installed in the next ServSwitch Multi unit, and repeat steps 2 through 5 until you have reached the
last ServSwitch Multi unit in your system.
Summary of Contents for ServerSwitch Multi KV162RA
