Black Box ServerSwitch Multi KV162RA, Owner'S Manual

Page: 110 / 160

CHAPTER 9: Using the On-Screen Display (UICD Consoles Only)
109
Table 9-2. Administrator options available at the Channel-List Menu.
Press This Key
Sequence...
...To Do This
[F1] Get context-sensitive help.
[F2] Bring up the channel-setup menu, where you can configure the selected channel’s
name, address, scanning, and ID-window options.
[F3] Configure the on-screen ID window:
Use the [+] and [–] keys on the shared keyboard to set window width;
Use the spacebar to change text size;
Use the [PgUp] (page up) key to set background color;
Use the [PgDn] (page down) key to set text color;
Use the [
↑
], [
↓
], [
←
], and [
→
] (arrow) keys* to set window position (hold down
[SHIFT] while you do so to move the window in smaller increments);
Press [Enter] to save your completed configuration.
[F4] Quickly edit the name or address of the selected channel.
[F10] Log out of the ServSwitch Multi system. The user-login screen will appear; you must
log back in to the system to continue operation.
[F11] See more options.
[Insert] Add a new channel to the menu.
[Delete] Remove the selected channel from the menu.
[Enter] Switch to the highlighted channel.
[Alt] + [Enter] Switch to the highlighted channel in privacy mode. For more information on privacy
mode, refer to Section 8.10 .
[Alt] + [Tab] Cycle through the available menus.
*On the keyboard, not the keypad. At the time of this writing, the arrow keys on the keypads of IBM and Sun type
computers are not recognized.