SERVSWITCH™ MULTI
106
9.2.4 T
HE
C
OMMAND
-L
INE
-E
NTRY
W
INDOW
You can access the Command-Line-Entry Window (shown in Figure 9-3) by pressing the [Ctrl] key twice, then
pressing [Alt] + [Tab] twice. (System administrators will have to press [Alt] + [Tab] three times, because they
have to bypass the User-List Menu—see
Section 9.2.2
.) You can also access this window by pressing the
<CM>
Command Mode hotkey sequence (see
Sections 8.2.1
and
8.12
); in fact, whenever the Command-Mode
sequence is pressed on a computer attached to a UICD, this window pops up.
Figure 9-3. The Command-Line-Entry Window.
This window features a field where you can enter any ServSwitch Multi keyboard command; just type in your
command (without preceding it with another Command-Mode sequence) and press [Enter]. Refer to
Section 8.2
and
Sections 8.6
through
8.15
for information about all available commands.
Command Line
Enter your command above
Program Manager
Summary of Contents for ServerSwitch Multi KV162RA
