30
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Default Power-Up:
In the drop-down list, for each power outlet, choose the default status to apply after power up.
You can choose between:
“On” if you want the corresponding power outlet to be always switched on after power up.
“Off” if you want the corresponding power outlet to be always switched off after power up.
“Last Status” if you want the corresponding power outlet to resume the state it was in before power failure.
Power up delay:
In this field, enter the power up delay you want to define for each power outlet. Power up delay means the delay
before the power outlet will take the defined status after power up. The delay can be set to be between 1 and 255
seconds. The value 0 indicates that no delay will be applied after power up.
Function delay:
In this field, enter the delay that you want to define before the execution of a function (for example, Restart function of
an outlet).
Shutdowns Functions
ID:
The PSE544 automatically creates an ID Code to clearly identify the Shutdown Function.
SD1
identifies the Shutdown Function 1.
Create a new Shutdown Association:
Click on this button to create a new Shutdown Association.
Name:
In this field, enter the name that you want to assign to the Shutdown function. It can be from 1 to 32 characters long,
and it can contain alphanumeric characters.
NOTE:
Do not use quotes or special characters in labels.
LOGOUT:
Click “Logout” at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES:
Click “Discard Changes” at the bottom of the page to discard all of the changes that you have made on this page.
APPLY CHANGES:
Click “Apply Changes” at the bottom of the page to save changes.
CHAPTER 3: NETWORK SETTINGS
