manualshive.com logo in svg

Black Box PSE544-DE-R2, User Manual

Share
Download
Black Box PSE544-DE-R2 User Manual Download Page 42

42

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

Configuring the Action(s)

Type of Actions:

For the defined event, you can choose and configure following actions:

Set Outputs
NOTE:  

This type of Action only appears if:

 

Š

your device has own power outlets or has access to power outlets of connected xBus Peripheral Units.

 

Š

your device has access to Relay Outputs of connected xBus Peripheral Units.

 

Š

you have created interface associations through Settings/Associations. 

Select this checkbox and choose in the corresponding drop-down list the Output to use for this Rule. 

Each Power Outlet can be switched to On, Off, or Restarted.
If you choose “Restart” you can also define a Restart delay to be between 0 and 3,600 seconds.

 

Š

If you choose 0 seconds for the delay, the delay will be the one defined in the Peripherals page, accessible through 
Settings/Peripherals/Edit.

 

Š

If you choose a delay other than 0, this delay will replace the one defined in the Peripherals page, accessible through 
Settings/Peripherals/Edit.

Each Relay Output can be switched to Open, Close, Pulse Open, or Pulse Close.
If you choose Pulse open or Pulse close, you can also define a delay to be between 0 and 3,600 seconds.

 

Š

If you choose 0 seconds for the delay, the delay will be the one defined in the Peripherals page, accessible through Settings/

Peripherals/Edit.

 

Š

If you choose a delay other than 0, this delay will replace the one defined Peripherals page, accessible through Settings/Peripherals/

Edit. 

Rule to cancel

This type of Action only appears if you already have created a rule that you want to cancel.
Select this checkbox and choose in the corresponding drop-down list the rule that you want to cancel.

Send Magic to

Your Device has the possibility to send a Magic Word over IP to another device in order to remotely trigger an action.

 

Š

Send magic: specify the Magic Word to use; it can be from 1 to 32 characters long, and it can contain alphanumeric characters. 

 

Š

to: specify the IP address of the destination device

 

Š

port: specify the port number used to send the Magic Word; the default port number is 52389.

CHAPTER 3: NETWORK SETTINGS

Summary of Contents for PSE544-DE-R2





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands