manualshive.com logo in svg

Black Box PSE544-DE-R2, User Manual

Share
Download
Black Box PSE544-DE-R2 User Manual Download Page 19

19

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

3.1.9 GENERAL / SYSLOG

This page is used to define the address of two Syslog Servers.

FIGURE 3-6: SYSLOG SETTINGS

Primary Syslog Server

Select this checkbox and specify the IP address or the hostname of your primary Syslog server.

NOTE:  If you use a hostname, the system must be able to resolve queries for the hostname into IP address, so you 
must configure a default gateway and at least one DNS server on the Network Settings Page, accessible through  
General/IP Configuration page. 

Secondary Syslog Server

In this field you can define the IP Address of a secondary Syslog server.
You can enter either the hostname or the IP address of a Syslog server.

LOGOUT

Click “Logout” at the bottom of the page to exit the session without saving changes.

DISCARD CHANGES

Click “Discard Changes” at the bottom of the page to discard all of the changes that you have made on this page.

APPLY CHANGES

Click “Apply Changes” at the bottom of the page to save changes.

CHAPTER 3: NETWORK SETTINGS

Summary of Contents for PSE544-DE-R2





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands