Black Box PSE544-DE-R2 User Manual Download Page 50 | Manualshive

Page: 50 / 68

background image

50

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

Rule to cancel

This type of action only appears if you already have created a rule that you want to cancel.
Select this checkbox and choose in the corresponding drop-down list the rule that you want to cancel.

Send Magic to

Your device has the possibility to send a Magic Word over IP to another device in order to remotely trigger an action.

Send magic: specify the Magic Word to use; it can be from 1 to 32 characters long, and it can contain alphanumeric characters.

to: specify the IP address of the destination device

port: specify the port number used to send the Magic Word; the default port number is 52389.

Send Syslog Message
NOTE: This type of action can only be configured if you have already specified at least one destination Syslog
Server through General/Log Settings page.

Check this box if you want to send a message to a Syslog server. In the following drop-down list, choose the facility
and the severity of the message to send.

Send Trap Message
NOTE: This type of action appears and can be configured only if you have already specified at least one
destination SNMP Server through General/SNMP page.

Check this/these box(es) and specify one or two SNMP addresses in the corresponding field if you want to send SNMP
messages to one or two SNMP Servers.

Mail to
NOTE: This action can only be configured if you have already specified an SMTP Mail Server through General/SMTP.

Check this box and specify a valid email address.

Syslog / Trap / Mail Message
NOTE: This field can only be configured if you already have specified at least one destination Syslog Server
through General/Log Settings page or one destination SNMP Server through General/SNMP page.

Up to 255 characters may be entered in this free text field. The text will appear in the Syslog, in the Trap, and in the
emails.
The message can be completed with the status of an input (for example, a power supply or door contact) or the
value of a sensor (for example, a temperature sensor). For this, enter, between two “%” characters, the ID of the
corresponding input Device.

LOGOUT

Click “Logout” at the bottom of the page to exit the session without saving changes.

DISCARD CHANGES

Click “Discard Changes” at the bottom of the page to discard all of the changes that you have made on this page.

CHAPTER 3: NETWORK SETTINGS

«
...
48
49
50
51
52
...
»

Summary of Contents for PSE544-DE-R2





































































Reviews:

No comments

Related manuals for PSE544-DE-R2

Brand: SCHUNK Pages: 28

Brand: Vertiv Pages: 14

Knurr DI-Strip Rack PDU

Brand: Vertiv Pages: 26

Brand: KEMET Pages: 2

Brand: Bachmann Pages: 2

Brand: PS Audio Pages: 4

Brand: Ice Pages: 35

SURGE GUARD 44280

Brand: Southwire Pages: 2

POWER LINE 2004 EMS

Brand: Intellitec Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands