manualshive.com logo in svg

Black Box PSE544-DE-R2, User Manual

Share
Download
Black Box PSE544-DE-R2 User Manual Download Page 37

37

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

3.1.17 SETTINGS / RULES - TIMER RULE

This rule can be used to trigger some actions according to a defined time table. 
For example, you could create a rule to switch off a power outlet every Friday at 6 p.m. and create another rule to 
switch it on again every Monday at 8 a.m.

FIGURE 3-18: TIMER RULE

Activated

This check box must be checked to activate the rule. It enables the temporary deactivation of a rule while keeping all  
of its settings for later use.

Rule ID

The Power Switch automatically creates an ID Code to clearly identify each rule. These codes start with the letter “R” 
followed by a number.

Rule Name

This field records the name that you want to assign to the rule. It can be from 1 to 32 characters long, and it can 
contain alphanumeric characters.

NOTE:  Do not use quotes or special characters in labels.

Rule Color:

In this field, select one of the 48 standard colors that you want to use to highlight the rule when executed. To use your 
own color, enter the Hex value of the color you want. The rule highlighting allows users to quickly identify the triggered 
rule when displayed in the Rule Panel page or in a special user’s page.

CHAPTER 3: NETWORK SETTINGS

Summary of Contents for PSE544-DE-R2





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands