73
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Table 8--1 (continued). Problem-Resolution Guide.
Problem or Message
Probable Cause
Action
Damaged or improper
Check host cabling for
cabling
damage or improper
connection
Twinax cable improperly
Make sure the prior device is
terminated
not terminated (some PC
emulation cards may terminate
mid-line)
Line sync LED blinks
Address conflict with
Make sure no other device on
on and off
another twinax device
this cable has the same
on this cable
address
Damaged or improper
Check twinax cabling for
host cables
damage or improper
connection
Printer fault, such as
Make sure the printer has
paper out, paper jam,
paper, is clear of jams, etc.
etc.
Printer loses host
Improper or damaged
Check host cabling for
communication
cabling
improper connections or
(drops off line)
connections or damage
Right margin is cut off
Page width in word
Change to a wider page
processing program
is not wide enough
Page width is too wide
Select a narrower page
