110
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
The steps below describe printing with the APO feature (refer to the illustration
below).
1. If APO is not active (command 61, value 1; or front panel), the interface uses
the paper source selections (commands 62-64, or front panel) to control
orientation in the active font. If APO is active, the interface goes on to block
2.
2. The interface calculates the page size. If the page size is more than 8
1
⁄
2
" x 11"
the interface uses the paper source selections to control the orientation in
the active font. If the report is less than 8
1
⁄
2
" x 11", the interface goes on to
block 3.
3. At block 3, the interface checks the length and width. If the report is longer
than it is wide, it prints in portrait. If the report is wider than it is long, the
report prints in landscape.
Figure 10-1. Page Orientation Logic.
1
APO
Active?
(Command 61
or Front Panel)
No
START
Page Orientation
Logic
Yes
2
Print Size
Less Than
8 1/2 x 11?
Print according to
Paper Tray Orientation
(Command 62-64
or Front Panel Setting)
COR
Portrait Landscape
User
Defined
No
3
Is Length
Less than
Width?
No
Yes
Print in Landscape
Print in Portrait
Yes
