Black Box MXF9504-V11, Manual

Page: 15 / 47

Supervisor Terminal Emulations
Several terminal emulations are supported by the Sprint 2. When connection is made
between the terminal or PC and the rear panel port labelled
SUPERVISOR , the following
screen will appear:
The terminal type or emulation in use should be selected by pressing the relevant number key
on the PC or terminal. The monitor will now show the basic configuration screen for the
multiplexer setup. On the Sprint 2 LANLink this is formatted as below. This display for the
Sprint 2 shows standard V.24 data channels only.
SPRINT 2 TDM xxxxAE/x.xx
Mode : RUN
Data Monitor : RXD
Link Clock : AUTO 64000
X.21 Carrier : PRESENT
Residual : +24000
Option Cards
: NONE
Configure : >ACCEPT
Display Page : LOCAL
COPY CHANNEL : 1 2 3 4 5 6 7 X.21
RATE : 4800 4800 4800 4800 4800 4800 4800 4800
TYPE : SYNC SYNC SYNC SYNC SYNC SYNC SYNC SYNC
RX CLOCK : INT INT INT INT INT INT INT INT
TX CLOCK : INT INT INT INT INT INT INT INT
BITS/CHAR :
PARITY :
RTS/CTS DLY
: 0ms 0ms 0ms 0ms 0ms 0ms 0ms 0ms
SIGNALS : BOTH+ BOTH+ BOTH+ BOTH+ BOTH+ BOTH+ BOTH+ BOTH+
CHANNEL MODE : RUN RUN RUN RUN RUN RUN RUN RUN
Use cursor keys to select parameter, SPACE/- to toggle
Configuration Display Layout
Please select terminal type from the following:
1 = VT52/HP2600
2 = ANSI/VT100/VT200
3 = ADDS
4 = ADM-3A
5 = HAZELTINE 1500
6 = NEWBURY 8009
7 = TELEVIDEO 912/920