Configuration Display Definitions
Parameter
Display Options
Description
V.xx Carrier
PRESENT
The multiplexer is receiving clock (from the link if
EXT/RXC/ AUTO clock V.35 Carrier is selected)
and is also communicating with the remote
multiplexer.
LOST
There is no communication between the local and
remote multiplexer.
Link TXC
RxC(xx xxxxx)
Transmitted data clocked from Receive Clock.
INT(xx xxxxx)
Internally generated Transmit Clock.
xxx(OCTET)
TxD with G.703 octet timing CCITT compliant.
xxx(NO OCTET)
TxD without G.703 octet timing.
G.703 Carrier
PRESENT
The multiplexer is receiving clock from the link
and data from the remote unit.
LOST
There is no communication between the local and
remote multiplexer.
Residual
+xxxxx
Surplus bandwidth available with current
configuration.
-xxxxx
Excess bandwidth situation - NVRAM will not
ACCEPT configuration. A warning is displayed at
the bottom of the screen and a bleep is heard.
(WARNING - MAXIMUM AGGREGATE
SPEED EXCEEDED)
Option Cards
NONE
No option card fitted
VOICE
Single channel ADPCM voice option fitted
DUAL VOICE
Dual channel ADPCM voice option fitted
Configure
ACCEPT
The displayed configuration is stored in NVRAM
in both local and remote multiplexers.
ENTER
The configuration may be changed.
Display Page
LOCAL
The screen shows the configuration of the local unit
