There are two main areas on the supervisor set-up screen used to change parameters for the
Sprint 2.
Upper left -
System parameters
(Mode, Link
Clock, Carrier, Residual, and Configure).
Bottom -
Channel configuration
.
General Keyboard Conventions
Only a few keys are required to configure the Sprint 2 multiplexer. They are summarised as
follows.
→
(Right arrow)
Moves the cursor to the next field to the right.
←
(Left arrow)
Moves the cursor to the next field to the left.
↑
(Up arrow)
Moves the cursor to the next field upwards.
↓
(Down arrow)
Moves the cursor to the next field downwards.
<
SPACEBAR>
Toggles the parameter value
up
to the next available
setting.
<
ENTER
> or <
RETURN
>
Moves the cursor back to the CONFIGURE line.
<CTRL> and C
Abandons all changes since last update.
<CTRL> and A
Enables access to composite links settings.
Cursor Movement
