Black Box LWS100AE, Manual

Page: 43 / 68

LWS100A/LWS100AE User’s Manual
43
5.3 Ident-and-Connect ™
At the upper frame of the
SerialComm window, select Ident-and-Connect tap window. Figure 5-10 will be
displayed. There are two methods allow user to search the available SerialBridge units (LWS100A, LES300A
Series or LFS400A Series) in the network.
Subnet Broadcast Auto Discovery will search all the available SerialBridge units within the same IP subnet
as PC/NB has, refer to Figure 5-10.
Figure 5-10 Subnet Broadcast Auto Discovery
Two buttons, Start and Stop, are available for user to start the search or stop the search.
It will take few seconds for searching the available SerialBridge units. If the target SerialBridge unit
is found, you can use the Stop button to stop the search, or wait until the utility finish the search.
The Ident-and-Connect™ auto discovery function also provides the device description information: Alias,
Contact and Location which can be used to identify a device, especially there are many SerialBridge™