LWS100A/LWS100AE User’s Manual
27
4.
Command Mode Configuration
LWS100A/LWS100AE can be configured by command mode from HyperTerminal via console port or by
command mode via Telnet.
Note: HyperTerminal is a Microsoft Windows™ program usually accessible from Start, Programs,
Accessories, Communications, and HyperTerminal.
Refer to section 2.4 to set LWS100A/LWS100AE serial port as the console port.
4.1
Console Port Default Settings
When LWS100A/LWS100AE serial port is set to console mode, the console port default settings are:
Baud rate:
2,400
Data length (bits):
8
Parity:
None
Stop bits:
1
Flow control:
None
Note: These default values are permanent and can not be changed.
4.2
HyperTerminal Settings
From Windows, click
Start, Programs, Accessories, Communications, and HyperTerminal to open the
HyperTerminal and assign a name, e.g. LWS100A as shown in Figure 4-1.
Figure 4-1 Open HyperTerminal
Summary of Contents for LWS100AE
