LWS100A/LWS100AE User’s Manual
11
2.4
Serial Port Operation Mode Setting
LWS100A/LWS100AE supports dual serial ports. Each port can be a console, RS232, RS422 or RS485 port
selected by the DIP switch, refer to Figure 2-1.
Figure 2-1 LWS100A/LWS100AE Rear Panel
There is a DIP switch and serial port ping assignment table attached at the bottom of LWS100A/LWS100AE. Set
the serial port type based on your need, refer to Figure 2-2.
Note: The default DIP switch is set port 1 to console and port 2 to RS232. After the initial settings, remember to
set the DIP switch to meet your need.
Note: After changing the DIP switch, you need to reboot the device to make the change valid. To reboot the
device, you can do it via web browser or by command (console port or Telnet). Unplug and then re-plug
the power can also reboot the device.
Summary of Contents for LWS100AE
