background image

Configuring the RAS with a Web browser

40

Model LRA2900A RAS Getting Started Guide 

3 • Configuring the RAS for operation

2. Click on 

Modify

. The Modify Dial-In window appears (see figure 24).

Figure 24. Modify Dial-In window, Login section

3. The IP address pool contains the IP addresses that are assigned dynamically to the dial-in connections. 

Type the IP address pool in the space provided. The IP addresses can be non-contiguous addresses config-
ured as follows:

– Blocks of IP addresses are designated with a dash (-) separating the first and last host in the block (for 

example, 192.49.110.151-155)

– The addresses can be from a subnet other than the local network the RAS is on

– The IP address pool can have IP addresses from multiple subnets. The subnets must be separated by a 

semi-colon (for example, 192.155.155.1-6; 192.155.160.41-46)

Note

The IP address pool is limited to 39 characters.

4. Click the 

Submit Query

 button under the section.

Note

Each section in the Modify Dial-In window has its own 

Submit 

Query

 button. In order for a change in a particular section to take 

place, that section’s submit query button must be selected before 
making changes elsewhere.

5. Scroll down to the Domain Name Server section of the Modify Dial-In window (see figure 25).

Summary of Contents for LRA2900A



































































Reviews: