Black Box LGB5000 Series User Manual Download Page 90

Page: 90 / 236

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 2: CONFIGURATION

FIGURE 2-53. IPMC PROFILE CONFIGURATION SCREEN

PARAMETER DESCRIPTION

Global Profile Mode: Enable/Disable the Global IPMC Profile. The system starts to do filtering based on profile settings only when the

global profile mode is enabled.

Delete: Check to delete the entry. The designated entry will be deleted during the next save.

Profile Name: The name used for indexing the profile table. Each entry has the unique name which is composed of at maximum 16

alphabetic and numeric characters. At least one alphabetic character must be present.

Profile Description: Additional description, which is composed of at maximum 64 alphabetic and numeric characters, about the profile.

No blank or space characters are permitted as part of description. Use “_” or “-” to separate the description sentence.

Buttons

Apply: Click to save changes.

Reset: Click to undo any changes made locally and revert to previously saved values.

Add New IPMC Profile: Click to add a new IPMC profile. Specify the name and configure the new entry. Click “Save.”

Summary of Contents for LGB5000 Series












































































































































































































































Search results

Summary of Contents for LGB5000 Series

Reviews:

Related manuals for LGB5000 Series

Brands by name

Popular brands

Black Box LGB5000 Series, User Manual

Search results

Summary of Contents for LGB5000 Series

Reviews:

Related manuals for LGB5000 Series

Brands by name

Popular brands