9
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 1: OPERATION OF WEB-BASED MANAGEMENT
INITIAL CONFIGURATION
This chapter explains how to configure and manage the LGB5028A-R2 or LGB5052A-R2 through the web user interface. With this
facility, you can easily access and monitor, through any one port of the switch, the status of the switch, including MIBs status, each
port activity, Spanning tree status, port aggregation status, multicast traffic, VLAN and priority status, even illegal access record
and so on.
The switch’s default values are listed below:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Username: admin
Password: <none> (Just press the Enter key.)
After the LGB5028A-R2 or LGB5052A-R2 has finishes configuring its interface, you can browse it. For instance, type
http://192.168.1.1 in the address row in a browser, and it will show the following screen and ask you to input username and
password to login and access authentication.
The default username is “admin” and password is empty. For first-time use, enter the default username and password, and then
click the <Login> button. The login process now is completed. In this login menu, you have to input the complete username and
password respectively, the LGB5028A-R2 or LGB5052A-R2 will not give you a shortcut to username automatically. This looks
inconvenient, but safer.
The LGB5028A-R2 or LGB5052A-R2 allows two or more users using administrator’s identity to manage this switch, the
administrator who does the last setting will be the available configuration in the system.
NOTE: When you log in to the Switch web page to manage the switch, you must first type the Username of the admin. The
password was blank, so after you type the Username, just press enter. You will see the management page.
When you log in to LGB5028A-R2 or LGB5052A-R2 series switch Web UI management interface, you can use both ipv4 ipv6.
To optimize the display effect, we recommend you use Microsoft IE 6.0 above, Netscape V7.1 above or Firefox V1.00 above with a
resolution of 1024 x 768. The switch supports a neutral web browser interface.
NOTE: The LGB5028A-R2 or LGB5052A-R2 has the function dhcp enabled, so If you do not have a DHCP server to provide ip
addresses to the switch, use the Switch default ip 192.168.1.1
FIGURE 1-1. LOGIN SCREEN
