Black Box LGB5000 Series User Manual Download Page 163

Page: 163 / 236

163

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 3: MONITOR

Rx and Tx Pause: A count of the MAC Control frames received or transmitted on this port that have an opcode indicating a PAUSE

operation.

Receive and Transmit Size Counters

The number of received and transmitted (good and bad) packets split into categories based on their respective frame sizes.

Receive and Transmit Queue Counters

The number of received and transmitted packets per input and output queue.

Receive Error Counters

Rx Drops: The number of frames dropped due to lack of receive buffers or egress congestion.

Rx CRC/Alignment: The number of frames received with CRC or alignment errors.

Rx Undersize: The number of short 1 frames received with valid CRC.

Rx Oversize: The number of long 2 frames received with valid CRC.

Rx Fragments: The number of short 1 frames received with invalid CRC.

Rx Jabber: The number of long 2 frames received with invalid CRC.

Rx Filtered: The number of received frames filtered by the forwarding process.

Short frames are frames that are smaller than 64 bytes.
Long frames are frames that are longer than the configured maximum frame length for this port.

Transmit Error Counters

Tx Drops: The number of frames dropped due to output buffer congestion.

Tx Late/Exc. Coll.: The number of frames dropped due to excessive or late collisions.

Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

v v

Refresh: Click to refresh the page immediately.

v v

Clear: Flushes the selected log entries.

3.3.5 SFP DETAIL INFORMATION

This page displays general SFP information and monitoring information.

WEB INTERFACE

To Display the SFP information in the web interface:
1. Click Monitor, Ports and SFP Detail Info.
2. Display the SFP Information.

Summary of Contents for LGB5000 Series












































































































































































































































Search results

Summary of Contents for LGB5000 Series

Reviews:

Related manuals for LGB5000 Series

Brands by name

Popular brands

Black Box LGB5000 Series, User Manual

Search results

Summary of Contents for LGB5000 Series

Reviews:

Related manuals for LGB5000 Series

Brands by name

Popular brands