manualshive.com logo in svg

Black Box LGB5000 Series, User Manual, Page: 231 / 236

Share
Download
Black Box LGB5000 Series User Manual Download Page 231

231

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: MAINTENANCE

FIGURE 5-10. DELETE CONFIGURATION SCREEN

PARAMETER DESCRIPTION
Buttons

 

Š

Delete Configuration: Click the “Delete” button and the startup.

5.6 SERVER REPORT

It is possible to download a server report file on the switch to the web browser. 
Download of a server-report may take a little while to complete, as the file must be prepared for download.

WEB INTERFACE

 

To delete configuration in the web interface:
1. Click Maintenance and Server Report.
2. Click Download Server Report.

FIGURE 5-11. SERVER REPORT SCREEN

PARAMETER DESCRIPTION
Buttons

 

Š

Download Server Report: Download server report file on the switch to the web browser.

Summary of Contents for LGB5000 Series













































































































































































































































Reviews:

No comments