129
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: CONFIGURATION
PARAMETER DESCRIPTION
Port: The logical port for the settings contained in the same row. Click on the port number to configure the schedulers.
Qn: Shows the weight for this queue and port.
Scheduler Mode: Controls whether the scheduler mode is “Strict Priority” or “Weighted” on this switch port.
Queue Shaper Enable: Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate: Controls the rate for the queue shaper. The default value is 500. This value is restricted to 100-1000000 when the
“Unit” is “kbps”, and it is restricted to 1-13200 when the “Unit” is “Mbps”.
Queue Shaper Unit: Controls the unit of measure for the queue shaper rate as “kbps” or “Mbps.” The default value is “kbps.”
Queue Shaper Excess: Controls whether the queue is allowed to use excess bandwidth.
Queue Scheduler Weight: Controls the weight for this queue. The default value is 17. This value is restricted to 1-100. This parameter is
only shown if “Scheduler Mode” is set to “Weighted.”
Queue Scheduler Percent: Shows the weight in percent for this queue. This parameter is only shown if “Scheduler Mode” is set to
“Weighted.”
Port Shaper Enable: Controls whether the port shaper is enabled for this switch port.when the “Unit” is “kbps,” and it is restricted to
1-13200 when the “Unit” is “Mbps.”
Port Shaper Unit: Controls the unit of measure for the port shaper rate as “kbps” or “Mbps”. The default value is “kbps”.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Cancel: Click to undo any changes made locally and return to the previous page.
2.18.4 PORT SHAPING
This page provides an overview of QoS Egress Port Shapers for all switch ports.
WEB INTERFACE
To configure the QoS Egress Port Shapers in the web interface:
1. Click Configuration, QoS and Port Shaping.
2. Click the Port and display the Qos Egress Port Shapers.
3. Scroll the Port and Scheduler Mode and specify the Queue Shaper parameter.
4. Click Apply to save the setting.
5. If you want to cancel the setting, then you need to click the Reset button. It will revert to previously saved values.
