Installation Manual
Fingerprint scanner and code keypad
Plug the plastic spacer frame into the
supporting frame.
Position the stainless steel outer frame on
the spacer frame
Establish the electrical connection with the
module and test the function.
Finally, clip the module into the retaining
tabs provided.
Caution:
once the module has been clipped
into the supporting frame, it is extremely
difficult to remove.
It could be damaged when it is removed.
Installation Manual, edition 3 dated 02/01/2013
Page 31
Copyright © BKS GmbH, 2012. All rights reserved.
C 59 501 107
