30
4.
Use
to select between each LAN setting, and use the numeric keypad to change
the settings. Press
Enter
Enter
to confirm setting changes
5.
Below list the options that can be changed for each setting:
Gateway:
000.000.000.000
IP:
000.000.000.000
Mask:
000.000.000.000
Socket Port: XXXXX
6.
All LAN settings must match with the settings configured on the PC in order for
communication to link successfully.
7.
Press
several times to exit the menu.
GPIB (9803 & 9805 only)
1.
From the Config menu, select GPIB and press the button. This will select the GPIB
interface for remote communication.
2.
Use the keys to select Address 0-31 and press the
Enter
Enter
button.
3.
To exit the menu at any time, press the key
three times.
Save/Recall Instrument Settings
The instrument can save up to 10 instrument settings in non-volatile memory. Memory is
allocated in 10 data banks to store settings (0 to 9).
Save Settings
1.
Set up all the instrument settings that you want to save.
2.
Then, press (Shift)
and
Recall
(Save). The display will show the following:
3.
Use the rotary knob or the numeric keypad to enter the memory location in which to
store current instrument settings. Select between 0 – 9. Press
Enter
Enter
to save to the
selection location.
4.
If it saved successfully, there will be a message on display: Save Success!
80.0V 0.0mA
S ave D ata to B ank = 0
0.0 s
OFF
50.0