22
3
Front Panel Operation
3.1
Menu Options
All settings and parameters can be configured from the menu of the power supply. To access
the menu, press (Shift)
and press (Menu)
.
The menu is divided into the following sections and organized as follows:
SYSTEM
Init
Reset power supply settings to factory default values
Power-On
Configure power-on parameters
Power-Out
Configure power-on output state
Buzzer
Enable/Disable key sound
Trigger
Configure Trigger
Communication
Select communication interface
CONFIG
Volt-Min
Set minimum voltage limits
Volt-Max
Set maximum voltage limits
Freq-Min
Set minimum frequency limits
Freq-Max
Set maximum frequency limits
Irms-Protect
Configures current RMS protection setting
BNC-Set
Select external BNC connection setup
Ipeak-Protect
Configures current peak protection point
Dimmer
Configures dimmer output function
List-Set
Configure list start trigger
Meas-Freq
Select measure frequency range
Meas-Curr-Mode
Select measure current range
3Φ - option
Not used
INFO
Error Info
Displays error information (Shown only when an error has occurred)
Product Info
Displays model and firmware version
Product SN
Displays serial number
Record Info
Displays instrument information
How to Access the Menu
Before using the instrument, it is important to be familiarized with its menu structure and learn
how to view or change settings and parameters. Follow the steps below to guide you in
selecting menu options.
1.
From the normal display, press (Shift)
and press (Menu)
to enter the menu.
2.
The selected item will be blinking. Use
keys to move through the menu
selections.
