Operating instructions SC II
Operation
61429850113 en-US
53 / 107
6.15.2
Tare balancing with known tare
– When a packaged article is weighed, the tare weight must already be known (packaging/
PLU-related tare).
– With multi-division scales, the known tare may only be within the smallest division range.
– After calling up a fixed tare (T1-Tx), or after entering a manual tare, these tares cannot be
overwritten by a PLU tare (PLU tare is ignored).
– A PLU tare cannot be overwritten by a fixed tare (T1-Tx).
– A known (entered) tare cannot be overwritten with an unknown (weighed) tare. The known
tare can be entered in 3 ways.
1. Manual tare
2. Allowing for a tare via the fixed tare key T1 - Tx
3. PLU tare
– In various countries manual tare is not allowed. Manual tare can be switched on or off in
the service menu, under "Adjustment". This menu item can only be accessed when the
balancing bridge of the ADC is closed.
After verification the manual tare may not be changed any more.
Rounding rule for
known
tare
After entering and applying the tare value, the least significant display position is rounded au-
tomatically.
Interval from 2 to 2 g
e.g.:
Weighing range
6.000 kg
Interval
0.002 kg
Odd tare value entries (1,3,5,7,9) in the least significant display position are generally
rounded up (2,4,6,8,10).
Display step from 5 to 5 g
e.g.:
Weighing range
15.000 kg
Interval
0.005 kg
Tare value input is rounded up or down in the least significant display position.
Input 1 or 2
- Rounding off to 0
Input 3 or 4
- Rounding up to 5
Input 6 or 7
- Rounding off to 5
Input 8 or 9
- Rounding up to 10
Summary of Contents for SC II 100
Page 99: ...Operating instructions SC II Annexe 61429850113 en US 99 107 10 Annexe...
Page 103: ...Operating instructions SC II Annexe 61429850113 en US 103 107 Illustration 86 WLAN BWLC2...
Page 104: ...Annexe Operating instructions SC II 104 107 61429850113 en US Illustration 87 WLAN BWLC2...
Page 105: ...Operating instructions SC II Annexe 61429850113 en US 105 107 Illustration 88 WLAN BWLC2...
