background image

Operating instructions SC II

About the device

61429850113 en-US

17 / 107

2.9

Demo license

The device is equipped with basic software. The device is also equipped with the purchased
software modules.

In addition, the device is enabled with all software modules included in the program version
for a specific period of time, so that the customer can use all software modules without re-
striction for a specific time. This gives the customer the opportunity to test software modules
that he has not purchased. The customer can purchase these additional software modules at
any time.

Software modules that are purchased subsequently require special activation.

If the additional software modules are not released, you can no longer use them once a spe-
cific time period has expired.

The additional software modules are provided exclusively for demonstration purposes. There
is no entitlement to free provision after expiry of the set time period.

Please contact your technical consultant or Bizerba at any time for further information.

2.10

Software by third party

A JPEG library is used in the software. It does not require a license. This software is based in
part on the work of the Independent JPEG Group.

2.11

Disposal of devices/environmental protection

Only valid for Germany!
The application of the disposal regulations is based on legal
regulations of the respective country.

This device contains batteries which fall under the Batteries Act for the return and disposal of
used batteries and accumulators.

This ordinance requires you, as the end user, to return the device to the manufacturer or
dealer, at the end of its proper use, for the purposes of recycling and correct disposal.

Bizerba and its dealers are naturally willing to take back these defunct old devices.

Please contact your specialist in these cases.

If your device contains a rechargeable battery, you are required by the Battery Ordinance to
return the used battery to the dealer or the public return points provided for this purpose.

Naturally, Bizerba and its dealers will also take back the used batteries.

 CAUTION

Risk of explosion if batteries are not replaced properly.

Please follow the manufacturer's instructions when disposing
of used batteries.

Summary of Contents for SC II 100












































































































Reviews: