Bizerba SC II 100 Operating Instructions Manual Download Page 88

Page: 88 / 107

Maintenance

Operating instructions SC II

88 / 107

61429850113 en-US

Maintenance

8.1

Cleaning

Cleaning instructions must be observed during installation, operation and maintenance.

8.1.1

Cleaning device

DANGER

Water getting into device!

Danger of death from electric shock.

– make sure that no water runs into the device when cleaning.

– Do not wash device off or spray-wash.

NOTICE

Incorrect cleaning agents!

Damage of device surfaces.

– Do not use spirit, acetone or aggressive cleaning or scouring

agents.

Switch device off and disconnect the plug.

Use warm water with dish-washing detergent (food safe) for cleaning. Use a soft, non-fraying
cloth, moistened lightly.

8.1.2

Cleaning the printer

Tear-off edge

CAUTION

Sharp-edged tear-off edge!

Cut-injuries at finger.

– Do not touch tear-off edge.

Summary of Contents for SC II 100












































































































Search results

Summary of Contents for SC II 100

Reviews:

Related manuals for SC II 100

Brands by name

Popular brands

Bizerba SC II 100, Operating Instructions Manual

Search results

Summary of Contents for SC II 100

Reviews:

Related manuals for SC II 100

Brands by name

Popular brands