11
Description of display bodies
Top panel of the tracking device contains two LEDs that indicate the
current status of the device.
LED "STATUS" (
red
) is on for 0.5 seconds and is off for 0.5 seconds
when GPRS connection is inactive; is constantly on when GPRS connection
is active and the device is connected to a remote server; LED slowly flashes
for 0.2 seconds when GPRS connection is not active, and the modem is in
sleep mode.
LED "GNSS" (
green
) flashes (or lights) when the device is receiving
correct position coordinates and is off when the device is not receiving the
coordinates, or the signal is too weak, and the data are not correct.
Adjustment of "BI 530R TREK" device
Basic information
The tracking device "BI 530R TREK" can be configured in following
ways:
1. With a direct connection of the device to a computer.
2. Remotely, using SMS commands.
3. Remotely, using the configuration server.
Setting of the device through any of the available methods is limited
with the setting of the required values of the device parameters. Each
parameter has its own unique ID. Special commands are used to
read/record the values of selected parameter.
At remote configuration via SMS take into consideration that the total
length of the SMS shall not exceed 160 Latin characters. Number of
commands in SMS is limited to a maximum length of SMS.
All commands for the device are divided into control and information
commands.
List of information commands to operate the device
Table 3 - List of information commands to operate the device "BI 530R
TREK"
N
o.
Comman
d
Description
Availabil
ity of
respons
e
1
getstatus
Information about current state of the
device
yes
2
getgps
Current GPS coordinates and time of
device.
yes
3
getmap
Request of device coordinates
yes
4
getver
Request of the version of the device
software
yes
