10
use an additional USB-UART converter, which can be purchased from a
dealer for an additional fee.
UART service output socket is located on the board of the device next
to the SIM-card slot. To access the socket, remove the side cover of the
device. Procedure of connection of USB-UART converter cable is shown in
Figure 4.
Connect the cable of USB-UART converter to the tracking device so
that the arrow on the cable socket to be located closer to the SIM-card slot
(see Figure 4).
To work with the USB-UART converter, install the appropriate device
drivers. They can be downloaded from the official website:
To exchange data with the device, use a terminal program. Settings
of the terminal: speed - 115200 bit/second, data bit - 8, stop bit - 1, no
parity check, no flow control.
Figure 4 - Connection of the cable of USB-UART converter to the
device "BI 530R TREK".
Once connected, the device will transmit data about its state to the
terminal. In addition, the user is able to use a terminal program to send
commands to a device and receive response to them. Send preliminary to
device the password to access the terminal in the following format:
TPASS: password;
, where password is a password for access to the device terminal (default
value is 11111).
Lifetime of access password after sending is 60 seconds.
After this time, re-send the password to exchange data with the device.
