background image

Bischoff & Bischoff GmbH | 14.02.2020

EN

29

28

Eltego

 | Electric Wheelchair

Electric Wheelchair | 

Eltego

6.3.1. Charging Procedure

First Charging:

To achieve maximum charging capacity of the batteries, proceed as 
follows:

• 

Drive until the factory-charged batteries are down to 2 bars on the 
LED display.

• 

Then recharge the batteries as described below (app. 16 hrs).

• 

Drive until the batteries are down again to 2 bars on the LED 
display.

• 

Recharge the batteries again as described below.

Only use approved charging units to recharge the 
batteries (see Technical Data). Also observe the in-
structions in the charging unit’s operating manual!

• 

Before turning on the charging unit, check whether the supply 
voltage is 230 V.

• 

First turn off the wheelchair.

• 

Connect the charging unit to the wheelchair. The charging jack is 
located under the control panel to one side.

• 

Put the power plug of the charging unit into the power outlet  
(230 V) and turn on the charging unit.

• 

The charging indicator on the charging unit shows the status of the 
charging process.

•  

Flash

 

Green:   Standby

 

•  

Solid Red:  Charging

 

•  

Solid Green:  Fully Charged, the charging unit is switched on.

•  

Flash Red:

 

 Error

• 

After completing the charging process, pull the power plug and 

disconnect the charging unit from the wheelchair.

6.3.2. Exchanging Batteries

Be extremely careful when working with the batteries. Avoid working 
with metal tools, do not touch the battery terminals and observe the 
instructions of the manufacturer.

Warning! This work should only be carried out by a 
qualified mobility dealer. There is a risk to life!

Only use batteries that are approved for this wheelchair (see Technical 
Data).
Make sure the wheelchair is turned off before starting to exchange 
the batteries.

• 

Loosen the fitting holding the batteries in place and pull out the 
battery sled.

• 

Loosen the cover of the battery compartment.

• 

Loosen the battery cable, first the red one and then the black one. 
You won’t need a tool to do this.

• 

Carefully lift the batteries out on their straps.

• 

Lift the new batteries into their designated place and reconnect the 
terminals. Observe the correct color coding (red and black).

• 

Secure the battery cover with the Velcro strap and slide the 
battery compartment back into its original position. It will catch 
automatically.

26

27

When the service life of the batteries has expired, i.e. 
when they can no longer be charged sufficiently, the 
batteries may not be disposed of with the ordinary 
household garbage. Old batteries are taken back by 
the dealer and disposed of properly when buying a 
new battery from him!

24

25

Summary of Contents for Eltego




















Reviews: