Bischoff & Bischoff GmbH | 14.02.2020
EN
17
16
Eltego
| Electric Wheelchair
Electric Wheelchair |
Eltego
4. Using the Wheelchair
After adjusting the wheelchair to your personal needs, familiarize
yourself with the control functions.
4.1. Description of Control
Functions
13
14
Battery Status Display (Fig. 15)
The battery status display shows to what extent the batteries are
charged. If the indicator is within the green range, you have enough
battery power available. If the indicator is within the red range, only
short drives are possible and the batteries should be recharged. (See
charging procedure)
ON/OFF Button (Fig. 16)
Pushing this button will put your wheelchair into operational mode.
Speed Range Display (Fig. 17)
The speed range display shows you the pre-selected speed range.
You can set the speed between level 1 and 5, with the corresponding
number of LEDs lighting up. The speed range indirectly tells you the
maximum speed possible at full deflection of the joystick, i.e. with
level 5 you can reach the maximum speed possible, while level 1 will
keep you within the lowest speed range.
Setting the Speed Range (Fig. 17)
These buttons allow you to increase (right) or decrease (left) the
maximum speed possible. Within each range you control the speed
with the joystick.
Horn (Fig. 18)
The horn allows you to attract attention in difficult situations.
15
17
18
16
Charger and
Programmer Socket
Control Pannel
Joystick
