Bischoff & Bischoff GmbH | 14.02.2020
EN
11
10
Eltego
| Electric Wheelchair
Electric Wheelchair |
Eltego
3.3. Contents
After receipt of the goods, please check the contents for completeness
right away. The contents consist of:
•
outer package
•
electric wheelchair (ready for use incl. 2 batteries)
•
charging unit
•
instruction manual
3.4. Summary
3.5. Basic Settings
It is necessary to adjust the wheelchair to your body size before
first use. This is the only way to ensure a correct posture allowing
long drives without tiring. Below you find a description of the basic
settings of the wheelchair. You should carry out these adjustments
with the help of your mobility dealer. You need a set of 4 mm, 5 mm
and 6 mm Allen keys, a screw driver and ring spanners, 10 and 13.
3.5.1. Leg Supports
Length of lower leg supports
•
The lower leg supports can be adjusted from 470 to 550 mm.
•
To do so, loosen the two Allen screws (SW 4).
•
Adjust to the desired height.
•
Tighten the screws again. Use Loctite 243 to lock screws in place.
Make sure to always use two screws for secure fas-
tening!
Angle of footrest
•
The angle of the footrests is adjustable in 25° steps.
•
Loosen the screwing at the side of the footrest.
•
Adjust to the desired angle.
•
Tighten the screw again. Use Loctite 243 to lock screw in place.
Make sure to set the angle only within the marked
range!
02
03
push handles
backrest
control unit
armrest
side part
seat cushion
rear reflectors
front reflectors
suspension
drive wheel
foot rest
steering wheel
01
