9
Laser Illuminator
Adaptive IR Laser Illuminator
The A300 camera uses adaptive IR laser illuminator to provide
up to 1000 ft /1500 ft of long range illumination. IR laser uses
diffused illumination that provide the long distance visibility.
Precaution & Specs:
1. This product uses Class 3B laser light product.
2. Supports Manual / Auto IR laser control
3. Uses synchronous zoom with continuously adjustable il-
lumination angle of 68 ° ~ 2 °.
4. Supports intelligent light-adjustment which automati-
cally adjust the power of infrared laser light and avoids
reflective object and close range image overexposure.
5. Mount a laser dome camera at a height of six (6) meters
(19.7 ft) from the ground. To avoid bodily injury from the
laser radiation, please make sure that no one is within the
range of three (3) meters (9 ft) from the camera when the
laser is working.
6. When the IR laser is operating, do not look directly into
the laser beam or obstruct the pathway of the beam.
7. Everyone who uses a laser should be aware of the risks
and take necessary caution when handling, operating
and maintaining the product.
Wall Mount
1. Open the bracket cover, mount it onto the wall or pole
(use pole adaptor).
2. Put on 3 screws onto the bottom of the camera, leave
enough space to fit in the screw holes on the bracket,
not to screw tight.
3. Hold up the camera close under the bracket, insert the
tail-cable of the camera into the chest of the bracket.
4. Insert the 3 screws into the screw holes and turn the
camera counterclock wise so that the camera can be held
by the camera. Screw up the 3 screws but not too tight.
5. Put on the 4th screw and screw in tightly. Screw in the
rest of the screws tightly.
6. Finish the cable connection. Put all cable and connectors
inside of the bracket.
7. Put the cover back to the bracket and screw in securely.
