background image

12

EXPOSURE Menu

The EXPOSURE menu is used to set the items related to ex-

posure. 

AE MODE

 (Exposure Mode)

FULL AUTO:

 The exposure is adjusted automatically using 

the sensitivity, electronic shutter speed, and iris.

BRIGHT:

 Adjust the brightness level (LEVEL) manually.

SHUTTER:

 Shutter mode. The exposure is adjusted automat-

ically using the sensitivity and iris. Adjust the electronic shut-

ter speed (SPEED) manually.

IRIS PRI:

 Iris Priority mode. The exposure is adjusted auto-

matically using the sensitivity and electronic shutter speed. 

Adjust the iris (IRIS) manually.

MANUAL:

 Adjust the sensitivity (GAIN), electronic shutter 

speed (SPEED) and iris (IRIS) manually.

When you select one from various exposure modes, some of 

the following setting items that are required for the selected 

mode appear.

GAIN:

 Select the gain from the following: -3, 0, 3, 9, 15, 18 dB

SPEED:

 Select the electronic shutter speed from the fol-

lowing: 1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 

1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 

1/1750, 1/2500, 1/3500, 1/6000, 1/10000 sec.

IRIS:

 Select the iris the following: CLOSE, F14, F11, F9.6, 

F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.6

LEVEL:

 Select the brightness level from 0 to 23.

BACKLIGHT MODE:

 When the background of the subject is 

too bright, or when the subject is too dark due to shooting in 

the AE mode, back light compensation will make the subject 

appear clearer. This is set to ON, OFF.

WIDE-D (Wide dynamic range mode):

 ON, OFF. The cam-

era distinguishes light and dark areas within the same scene, 

adjusts the brightness for dark areas, and also controls the 

blown out highlights.

DEFOG:

 ON, OFF. If the shooting scene has fog, you can open 

the defog function to improve the penetration of the image.

AUTO SLOW SHUTTER:

 ON, OFF. When AUTO SLOW SHUT-

TER is set to on, it can auto adjust the electronic shutter 

speed.

EX-COMP (Exposure Compensation):

 When MODE is set to 

one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this item 

to ON to enable exposure compensation. When you set EX-

COMP to ON, LEVEL appears and you can select the expo-

sure compensation level from the following: -10.5, -9, -7.5, -6, 

-4.5, -3, -1.5, 0, +1.5, +3, +4.5, +6, +7.5, +9, +10.5

If you set the level to 0, exposure compensation will be dis-

abled. Level +10.5 is the brightest and –10.5 is the darkest 

compensation value. When EX-COMP is set to OFF, exposure 

compensation does not function.

EXIT: 

Push the joystick to the right to exit this level menu.

WHITE BALANCE Menu

The WHITE BALANCE menu is used to select the white bal-

ance mode.

MODE (white balance mode):

Select the white balance mode from the following:

AUTO, IN DOOR, OUT DOOR, ATW (Auto Tracing White 

Balance), OPW (One Push White Balance), USER, OUTDOOR 

AUTO, SLA (Sodium Lamp Auto), SL (Sodium Lamp), SLOA 

(Sodium Lamp Outdoor Auto).

When you select USER, R. GAIN (red gain) and B. GAIN (blue 

gain) appear. You can select each item in the range from 0 to 

255.

EXIT: 

Push the joystick to the right to exit this level menu.

Summary of Contents for NDI EYES A300





















Reviews: