BIRD SignalHawk SH-36S-RM-ASL, Operation Manual, Page: 26 / 195

12
Installation
PC SignalHawk Set-Up
Installing the SignalHawk Program
NOTE
Install the PC software before connecting the PC SignalHawk for the first time.
1. Insert installation CD.
2. Select Install Software when prompted.
NOTE
Set-up will inspect the computer for any missing operating system prerequisites. If all
are present, skip to step 6
3. Select “Next” and the install utility begins the Prerequisites Installation process.
4. Review the End-User License Agreement, check “I accept the terms of the License
Agreement” and select “Install.”
NOTE
•
The install Utility will install the prerequisites. This may take several minutes.
•
When completed, check with Microsoft support center for any security updates.
Typically, if “Automatic Updates” are configured on the host PC, these will be
automatically flagged and selected for download and installation.
•
The installation utility will launch after the OS prerequisites are installed.
5. Select installation directory by doing one of the following:
•
Accept the default installation location.
•
Select a different folder.
6. Select “Next” and the installer will complete.
7. Select “Finish” to launch the SignalHawk program.
8. Connect PC SignalHawk to a PC using the supplied USB cable.
NOTE
The “USB Host Power” LED will illuminate when the host port is active and has power. It
is not an indication of proper USB connectivity to the host.
9. Turn power on.