Biosan Labaqua Operating Manual Download Page 8

3.  Getting started 

3.1. 

Unpacking.  

 

Remove packing materials carefully and retain for them future shipment or storage 
of  the  unit.  Examine  the  unit carefully  for  any  damage  incurred  during  transit.  The 
warranty does not cover in-transit damage. 

 

Caution!

 

Due to the unit’s weight its unpacking and installing is to be carried 
out by two persons.  

3.2. 

Complete set. Package contents: 

 

Standart set: 

Labaqua Bio / Labaqua HPLC unit .................................................................... 1 pce 

LLDPE tube, Ø1/4”, 3m ..................................................................................... 5 pcs 

point-of-use ultrafilter set (Bio) / microfilter set (HPLC) ...................................... 1 set 

power cable ....................................................................................................... 1 pce 

prefilter cartridge ............................................................................................... 2 pcs 

IonPro deionization cartridge ............................................................................. 1 pce 

polishing cartridge ............................................................................................. 1 pce 

controller module ............................................................................................... 1 pce 

Ø1/4” elbow ....................................................................................................... 5 pcs 

Ø1/2” NPTF tap water to Ø1/4” JG elbow adapter ............................................ 1 pce 

Ø3/4” NPTF tap water to Ø1/4” JG elbow adapter ............................................ 1 pce 

Ø1/2” NPT tap water to Ø1/4” JG adapter ......................................................... 1 pce 

Ø1/4” bypass tube with elbows ......................................................................... 2 pce 

Ø1/4” elbow with tube........................................................................................ 4 pce 

external storage tank, with pump, level switch and tap ...................................... 1 set 

Ø3/8” with elbow, 3m overflow tube .................................................................. 1 pce 

Ø3/8”, 1m tank dispense tube ........................................................................... 1 pce 

tank cable .......................................................................................................... 1 pce 

hex key for controller module ............................................................................ 1 pce 

Operation manual, declaration of conformity ................................................... 1 copy 

Optional accessories:

 

TOC monitoring module (integrated) ......................................................... on request 

0.22 μm air vent filter for the storage tank  ................................................ on request 

Reverse osmosis membrane for higher capacity (20 L/h)  ........................ on request 

Electrodeionization module 10-30 L/h  ...................................................... on request 

Water storage tank “Comfort” 
with level switch and dispense pump, 60 L  .............................................. on request 

Water storage tank “Economy” 
with level switch and dispense pump, 50 L  .............................................. on request 

Water storage tank “Comfort” with dispense pump, 100 L  ....................... on request 

Water storage tank “Comfort” with dispense pump, 200 L  ....................... on request 

Water storage tank “Comfort” with dispense pump, 300 L  ....................... on request 

IQ/OQ documentation  .............................................................................. on request 

For clean tap water with hardness < 130 ppm: 
Pre-

filter housing 10” with fittings  ............................................................. on request 

Sediment filter 1 μm  ................................................................................. on request 

For muddy and/or hard tap water with hardness > 130 ppm: 
Pre-

filter set 3 x 10” with cartridges (polyphosphate, 5 and 1 μm)  ........... on request 

 

 

Summary of Contents for Labaqua





















Reviews: