Bionizer Spa Star, Instruction Book

Page: 6 / 16

Filter
Pressure
10cm
(minimum)
NOTE THAT THE 10cm SPACINGS SHOWN ABOVE ARE FROM THE
EDGES OF THE PODS, NOT THE CENTRE OF THE PODS.
Ionizing
Pod
pH Tee
Oxidizing
Pod
10cm
min
10cm
min
INSTALLATION
! Locate a section of pipe where the two Pods can
easily fit. The Pods must be fitted on the pipe
that sends water back to the pool after it has
been filtered (the “Return Line”).
! Ensure that there is a minimum of 10cm of straight
pipe AFTER the Ionizing Pod.
! Both Pods can be fitted horizontally or vertically, so
they can be mounted anywhere installation is
convenient and easy.
! If you are installing a pH BOSS the fittings MUST
be installed in this order :
1. pH BOSS Probe and Injection Tee
2. Ionizing Pod
3. Oxidizing Pod
The OxiPod cartridge can be fitted horizontally or
vertically, as long as it is after the other two.
! HINT : Even if you are not installing a pH BOSS
now, you may want to leave a space for the pH
BOSS Tee-Piece Fitting. This requires 20cm of
HORIZONTAL pipe BEFORE the Ionizing Pod.
INSTALLING THE IONIZING AND OXIDIZING PODS
Filter
For sand filters,
glass or silica sand
media provides
optimum results.
Pool
Pump
6
INSTRUCTION BOOK