BIOMET innerVue II Operation And Care Manual Download Page 36

Page: 36 / 40

InnerVue

™

II Diagnostic Scope System

Connect the combination connector to the matching connector on the front of the

InnerVue™ II Diagnostic unit.

Note: These instructions are for basic usage of the InnerVue™ II system. Refer

to section 1.2 for the “Indication for Use”

3.2.2 Power-Down Procedures

When you are finished using the InnerVue

™

II system, turn off the system in order

to conserve lamp life.
Always disconnect the InnerVue

™

II unit from its power source when performing

any kind of maintenance (e.g. cleaning, replacing fuses, etc.).

3.2.3 Single-use endoscope disposal

When disposing of the single-use endoscope and endoscope accessories, follow

procedures for biologically hazardous materials.

Setup and Basic Usage

Summary of Contents for innerVue II









































Search results

Summary of Contents for innerVue II

Reviews:

Related manuals for innerVue II

Brands by name

Popular brands

BIOMET innerVue II, Operation And Care Manual

Search results

Summary of Contents for innerVue II

Reviews:

Related manuals for innerVue II

Brands by name

Popular brands