20
InnerVue
™
II Diagnostic Scope System
In some cases, you may need a larger display than what it provided by the
InnerVue
™
II Integrated Video Display. For this reason, the InnerVue
™
II
unit has
connections for multiple video outputs.
The InnerVue
™
II Diagnostic Scope System can be connected to a standard video
monitor or an S-Video video monitor, or both. Consult your video monitor manual
for the corresponding connections.
Setup and Basic Usage
S-Video Cable
(not included)
BNC to RCA Adapter (included)
RCS Cable (not included)
BNC Cable (not included)
TV monitor
To make these connections, plug the connecting cable(s) into the video output(s)
on the rear of the InnerVue
™
II Diagnostic System and the corresponding video
input(s) of the external devices.
A BNC-to-RCA adapter is supplied with the InnerVue
™
II Diagnostic Scope
System for use with an RCA cable, so that such connections can be made with an
RCA cable as well as a BNC cable. The adapter allows an RCA cable to be plugged
into the BNC video output on the rear of the InnerVue
™
II System video box.
Note: The S-Video connector on the back of the InnerVue
™
II System is rotated
45 degrees to the left. Most S-Video cables have an arrow on the connectors
to indicate the “top” of the connector. Finding this arrow and rotating it to the
left will help when connecting this type of cable to the InnerVue
™
II System.
Summary of Contents for innerVue II
Page 1: ...Operation and Care Manual ...
