22
InnerVue
™
II Diagnostic Scope System
3.1.4 Attaching Virtual Reality Glasses
1. To attach the iWear VR glasses, simply take the connector on the end of the
glasses and find the 4-pin connector on the back of the InnerVue
™
II Diagnostic
Scope System.
2. To disconnect the iWear VR glasses, pull the knurled ring on the glasses
connector directly away from the InnerVue
™
II unit. The ring will move and
the connector will disconnect.
3.1.5 Setting Up and Operating MediaCaptureUSB
The MediaCaptureUSB is a full-featured, fully integrated image-capture system that
is included with every InnerVue™ Diagnostic system. MediaCaptureUSB is also able
to be activated from the sterile field via the camera connected to the system. Your
hand never has to leave the camera to capture what you need.
Note: All functions that appear on the InnerVue
™
II display are also mirrored
on any external display.
3.1.5.1 Modes
The MediaCaptureUSB has three separate modes of operation:
1. Still Capture Mode—for capturing still images (“pictures”).
2. Video Capture Mode—for capturing video images (“movies”).
3. Image/Video Review Mode (or “Review Mode”)—for reviewing image captures
(available only if a CompactFlash® card is inserted in the InnerVue
™
II Diagnostic
system’s media slot, and the card already contains captured media).
There is a little red dot on the cable connector and the receptacle. When these are aligned, the plug can be
inserted into the receptacle.
iWear VR Glasses Connector
Setup and Basic Usage
Summary of Contents for innerVue II
Page 1: ...Operation and Care Manual ...
