28
5,THERAPY 6, THERAPY 7, and THERAPY 8 until the desired
THERAPY is displayed on the LCD Screen.
STEP 3:
(Optional) To set the Patient Timer see section 8.5
(Patient Timer). If the timer is not set, the device will con tinue to
run until the "ON/OFF" key (1)
is pressed, or if the device is
idol (with no intensity setting) for 7 consecutive minutes.
STEP 4:
Increase the Intensity using buttons (2)
and/or (3)
to begin stimulation.
11.
Malfunctions
Should any malfunctions occur while using this device, check:
• Whether the leadwires and electrodes are correctly connected to
the device. The leadwires should be inserted firmly into the device
sockets.
• For possible damage to the leadwires. Change the leadwires if
any damage is detected.
Do not attempt to repair a device yourself!
Opening the device case voids the warranty. Please contact the
dealer from whom the device was purchased. If they are unable to
assist you, please contact:
BioMedical Life Systems, Inc.
1954 Kellogg Avenue
Carlsbad, California 92008-6581 USA
Tel: (1) (800) 726-8367
BioMedical Life Systems, BV
Postbus 6
1800 AA Alkmaar, Netherlands
Tel: 31 72 567 2098
Summary of Contents for BioStim NMS2
Page 4: ...3...
