Biomedical Life Systems BioStim NMS2, Instructions Manual

Page: 12 / 31

11
Therapy
6
Constant Ramp On/Off 0
Asymmetrical Biphasic Wave On Time 0
PR 10Hz PW 200 μS Off Time 0
Therapy
7
Cycled Ramp On/Off 1/0
Symmetrical Biphasic Wave On Time 5
PR 35Hz PW 400 μS Off Time 5
Therapy Cycled Ramp On/Off 2/2
Symmetrical Biphasic Wave On Time 10
PR 35Hz PW 50 μS Off Time 20
5. Batteries
5.1 Batteries
In order to maintain the functional operation of the BioStim NMS²,
the batteries will have to be changed periodically. The device is
supplied with 4 AA Alkaline batteries. When batteries are running
low, a battery image will appear and flash on the bottom right
hand corner of the LCD display screen. When this image appears,
the batteries should be changed to ensure maximum performance.
If you have saved programs into the device, they will remain
stored even when the batteries are changed.
To insert batteries:
• Before opening the battery compartment, check sure that the
device is switched off.
• Flip open the battery compartment cover.
• Remove the batteries from the compartment. Gently insert the
new batteries by matching the +/- end of each battery with the +/-
symbol found inside the battery compartment.
• Flip the battery cover to the closed position.
• Remove the batteries if you do not plan to use the device for long
periods of time, otherwise leakage and damage to the device may
occur.
• Dispose of batteries in a proper manner.