8
The CO
2
bottle is not included, and must be provided by the
user.
The fittings of the regulators are either US CGA-320 or Euro
-
pe W21.8x1/14 RH standards.
1. Install the CO
2
pressure regulator on tank and make sure
it is tight by using a wrench or pliers [F9].
2. Connect the free end of the CO
2
tubing to the regulator
Connect CO
2
F10
F9
[F10]: unscrew the nut on the outlet, thread the end of
the CO
2
tube through the nut, insert the end of the CO
2
tube firmly onto the outlet and re-screw the nut back
onto the outlet.
3. Now open the valve on the top of the CO
2
bottle to start
the release of CO
2
.
4. Adjust the pressure to the mark “C” on the dial of the
pressure regulator (2.6 bar).
