biodex 950-440 Instructions For Use Manual Download Page 56 | Manualshive

Page: 56 / 76

biodex 950-440 Instructions For Use Manual Download Page 56

56

Deleting a Single Patient File:

1.

On the Select a Patient screen, touch the name to highlight the patient file.

2.

Touch <Delete>.

3.

Touch <OK> to confirm.

All test results for that patient are deleted.

Deleting a Range of Patient Files:

A specific type of test can be deleted (i.e., all Fall Risk Tests).

1.

Touch <Delete Range>.

2.

Select the range of patient records to delete: From a specific date, Prior To a specific date,
between two dates (From/To). Enter the date.

3.

Touch <OK> to confirm.

4.

The selected files are deleted, and the system returns to the Patient Management screen.

Exporting Patient Data

Use Export Patient Data to copy a stored test to a file in the Biodex file format (.bio) or a CSV
file format. A program such as Microsoft Excel can be used to open and edit the CSV file. For
more information using CSV files, contact [email protected].

•

Exporting and importing require a USB flash drive. Insert a flash drive into one of the
USB ports on the display.

«
...
54
55
56
57
58
...
»

Summary of Contents for 950-440













































































Reviews:

No comments